Cuplock scaffolding locks up to 4 horizontals into a single top/bottom cup node on the vertical standard — a simple, robust connection trusted by crews across the Middle East, India and Southeast Asia.
PJSCAFFOLD manufactures the complete cuplock range in hot-dip galvanized steel to EN 12810/12811, with high component interchangeability across bays and lifts — ideal for rental fleets and high-frequency reuse.
| Standard (vertical) | Φ48.3 × 3.2 mm, Q235B / Q355B, cups welded every 0.5 m |
| Horizontal | Φ48.3 × 3.2 mm, forged blade ends, 0.5 m node spacing |
| Surface finish | Hot-dip galvanized inside & out |
| Node capacity | Up to 4 horizontals per node + top cup for brace |
| Standards compliance | EN 12810 / EN 12811, ISO 9001 |
| Bay sizes | 0.5 m vertical increments; standard horizontal modules 0.9–2.5 m |
Plant maintenance scaffolds, shipbuilding, heavy shoring, straight facade runs, high-frequency reuse rental fleets.
Fast node locking (up to 4 horizontals at one node), no loose fittings, high component interchangeability and lower life-cycle cost for straight-run and shoring work.
Standards run in 0.5 m increments from 0.5 m to 3.0 m; horizontal modules from 0.9 m to 2.5 m. Custom lengths are available on request.
They are separate systems and not directly node-compatible, but PJSCAFFOLD supplies both and can design transitions — for example cuplock shoring under ringlock access — in one scheme.
Yes — cuplock is one of our most exported systems to the Gulf, India and Southeast Asia, with standard items in stock for 48-hour dispatch.
Free scheme design · Quantity take-off · Quote within 24 hours
Get a Quote →WhatsApp / Tel: +86 18955015380
Email: leo@pjscaffold.com
Hot-dip galvanized ringlock scaffolding in Q355B steel to EN 12810/12811. Factory-direct prices, 48h dispatch …
View details →Hook-type and flat steel planks 210×45 mm, load ≥ 4 kN/m², hot-dip galvanized for corrosion resistance. Anti-s…
View details →Send your drawings or bill of quantities — free scheme design and quote within 24 hours.