Frame (H-frame) scaffolding is the most economical access system: welded H-frames stacked and connected with cross braces. Nearly every masonry and plastering crew already knows it — which means zero training cost and the fastest erection on simple, repeating layouts.
Frames nest for compact container loading, cutting your freight cost per square metre. Choose hot-dip galvanized for long life or painted finish for the lowest upfront cost.
| Frame sizes | 1219 × 1700 mm / 1219 × 1930 mm (custom on request) |
| Tube | Φ42 × 2.0–2.3 mm (main), Q235B steel |
| Cross braces | Φ27 / Φ25 × 1.8 mm, with locking claw |
| Planks / walk boards | 210 × 45 mm hook-type steel plank |
| Surface finish | Hot-dip galvanized or painted |
| Standards compliance | EN 12810 / EN 12811, ISO 9001 |
Brickwork and plastering, painting, low-to-mid-rise residential, facade access, MEP installation.
Frame systems typically cost 30–50% less than ringlock per square metre. Painted finish lowers upfront cost; hot-dip galvanized lowers lifetime cost — see our 5-year total cost of ownership comparison in the News section.
The 1930 mm frame gives a taller working lift with fewer frames; the 1700 mm suits lower ceilings and tighter staging. We stock both.
Only light-duty shoring. For heavy structural support, ringlock or cuplock shoring towers are required by load class.
Yes — full sets (frames, braces, planks, base plates, guardrails) are packed per container plan to maximize load efficiency.
Free scheme design · Quantity take-off · Quote within 24 hours
Get a Quote →WhatsApp / Tel: +86 18955015380
Email: leo@pjscaffold.com
Hot-dip galvanized ringlock scaffolding in Q355B steel to EN 12810/12811. Factory-direct prices, 48h dispatch …
View details →Hook-type and flat steel planks 210×45 mm, load ≥ 4 kN/m², hot-dip galvanized for corrosion resistance. Anti-s…
View details →Send your drawings or bill of quantities — free scheme design and quote within 24 hours.