PJSCAFFOLD has supplied and exported scaffolding systems since 2014, working with partner production in Tianchang City, Anhui Province — the region where China's steel scaffolding industry is concentrated. We supply ringlock, cuplock and H-frame systems together with hot-dip galvanized steel planks and the full range of connecting components, and export to more than 50 countries.
This page exists so that a buyer evaluating us can verify who we are without three rounds of email questions. Everything below — how the product is made, who makes it, how quality is controlled, what the certifications are and how we handle your order — is the same information we would put in front of a site inspector. Where a claim would be easier to verify than to read, we tell you how to verify it.
We buy directly from the factory that runs the production line in Tianchang, Anhui. No trading-company margin sits between you and the actual production cost.
Because the production line is a named, long-term partner factory, we can arrange a factory audit or third-party pre-shipment inspection, and send sample components for independent testing in your country before a bulk order.
EN 12810 / EN 12811 system tests and ISO 9001. Test report numbers are issued with every order so your consultant or third-party inspector can verify them independently rather than taking our word for it.
Every standard is laser-etched with a batch code linking it to its material heat and mill certificate, so any component can be traced back through inspection to the raw steel it came from.
Inspection, production follow-up, consolidation, export documentation and shipping are handled by one company. If something is wrong, there is one party accountable to you.
Because we hold the factory relationship, we can reserve a production slot, keep standard items in stock for 48-hour dispatch, and tell you honestly when a date is not realistic.
| Stage | What happens |
|---|---|
| Specification and quotation | You send a BOQ or a required square-metre area. We price it from the factory component cost and confirm feasibility, including whether a production slot needs to be reserved. |
| Raw material verification | Steel tube arrives at the factory with mill certificates. Grade, wall thickness and tolerance are checked by measurement and spectrometry before it enters the production line. |
| Forming and welding | Standards are cut and rosettes welded at 500 mm centres; ledger and brace ends are forged. Weld quality is verified on jigs before galvanizing. |
| Hot-dip galvanizing | Components are pickled, fluxed and dipped to EN ISO 1461 at ≥ 55 μm, inside and out. Coating thickness is verified per batch against the standard. |
| Load and dimensional testing | Sample components from each batch undergo load testing and dimensional inspection against EN 12810 / EN 12811 before release. We forward the records with the batch. |
| Inspection and consolidation | We inspect on the factory floor — including sample components pre-shipped to you if required — then consolidate, count and pack per the container plan we prepared with your BOQ. |
| Loading and documentation | Container loading follows the weight distribution plan. Mill certificates, test reports and packing lists are issued with the consignment, and we handle export customs. |
| Company | PJSCAFFOLD — professional scaffolding system supplier and exporter |
| Established | 2014 |
| Location | West Guangling Road, Tianchang City, Anhui Province, China |
| Business model | Factory-direct supply: we purchase from long-term partner production in Anhui and export as the single point of contact — no trading margin in between |
| Product range | Ringlock scaffolding, cuplock scaffolding, H-frame scaffolding, hot-dip galvanized steel planks, stair towers, jacks, guardrails and connecting components |
| Steel grade | Q355B high-strength structural steel (≈ S355JR) as standard; Q235B available on request |
| Finishing | Hot-dip galvanizing to EN ISO 1461, ≥ 55 μm, inside and out |
| Certification | EN 12810 / EN 12811 system tests, ISO 9001 quality management |
| Verification | Factory audit and third-party pre-shipment inspection welcome; sample components available for independent testing before bulk order |
| Export markets | Shipments to more than 50 countries across the Gulf, Africa, Southeast Asia, South America and Central Asia |
| Quotation response | Within 24 hours for standard configurations |
| Contact | Leo — leo@pjscaffold.com · WhatsApp / Tel +86 18955015380 |
| Material verification | Spectrometry and dimensional check on incoming tube against the mill certificate |
| Weld inspection | Rosette welds verified on jigs; no weld breaks down under load test |
| Galvanizing check | Coating thickness measured per batch against EN ISO 1461 requirement |
| Load testing | Sample components tested to EN 12810 / EN 12811 before batch release |
| Traceability | Laser-etched batch codes on standards linking component to material heat |
| Inspection evidence | Dimensional and visual inspection with photographic records; third-party inspection available on request |
We are a supplier. PJSCAFFOLD sources ringlock, cuplock and frame scaffolding directly from a long-term partner factory in Tianchang, Anhui, and we take responsibility for the whole consignment as your single point of contact. You get factory pricing because no trading margin sits in between, and we are happy to arrange a factory audit or third-party inspection before you order.
Tianchang City, Anhui Province, China — West Guangling Road is our business address. Tianchang is the centre of China's steel scaffolding industry, which is where our partner production is based: deep local supply of tube, galvanizing capacity and skilled labour. We can arrange an audit visit or send you the factory's company details for verification.
Since 2014. We have supplied ringlock, cuplock and frame systems from Anhui production for twelve years, building a stable relationship with the same plant so that quality and lead times stay predictable rather than changing with each order.
More than 50 countries. Our regular destinations include the Gulf (UAE, Saudi Arabia, Qatar, Kuwait, Oman), North and West Africa (Algeria, Angola, Kenya, Tanzania), Southeast Asia and South America. We can provide shipping references on request for the market you are buying into.
Yes. We welcome audits and third-party pre-shipment inspection, and we can arrange sample components for testing in your country before a bulk order — which is a common requirement for giga-project and EPC tender material approvals.
Yes. Custom bay sizes, special lengths, alternative steel grades, brand marking, project asset codes and custom colors are all available and are produced on the same production line. Send your drawings or specification and we will confirm feasibility and price.
Direct. Because we buy from the factory rather than trading between wholesalers, our pricing reflects production cost without an intermediate margin. For long-term volume relationships we can discuss a framework arrangement — contact us with your projected annual volume.
Free scheme design · Quantity take-off · Price list within 24 hours
Get a Quote →WhatsApp / Tel: +86 18955015380
Email: leo@pjscaffold.com
The figures above come from our own production specification. These guides document how they are derived and how to check them against a supplier quotation.
Standard lengths, ledger modulus, rosette spacing and bay grids in full.
Read article →Tonnes per container and how mixed loading is balanced against your BOQ.
Read article →What the European standards mean for material approval on site.
Read article →Send your drawings or bill of quantities — free scheme design, quantity take-off and a quote within 24 hours.