Choosing a ringlock scaffolding supplier means trusting someone with the structure your crews work on for months. PJSCAFFOLD is not a trading company: we buy ringlock standards, ledgers, braces and jacks straight from our long-term partner factory in Tianchang, Anhui, and we are the single point of contact for the whole consignment. You get factory pricing, and you deal with one company that carries the responsibility for your order from inspection to loading.
Production is carried out by the factory we work with on every order, and we are happy to arrange a factory audit or third-party pre-shipment inspection — including sending sample components out for independent testing before you commit to a bulk order. Below is the practical information a procurement engineer normally has to chase a supplier for: how the product is made, how it is certified, how much fits in a container, what the lead time is, and how we handle payment. If a number you need is not here, send us the query and we will answer it within one working day.
We buy direct from the factory that runs the production line in Tianchang, Anhui — raw tube through galvanizing, welding, load testing and palletizing. No trading-company margin sits between you and the production cost.
Because the production line is a named, long-term partner factory, we can arrange a factory audit or send a third-party inspector before shipment, and produce sample components for independent testing in your country.
EN 12810 / EN 12811 system tests and ISO 9001. Test report numbers are supplied with every order so your consultant can verify them independently — no unverifiable claims.
Each standard carries a laser-etched traceability code linking it to its material batch, so a failed component can be traced back to the specific heat and mill certificate.
Inspection, production follow-up, consolidation, export documentation and shipping are handled by one company. If something is wrong, there is one party accountable to you.
Every quotation is built from the actual factory component cost, galvanizing and packing — and we show the bill of quantities behind it, so you can benchmark it line by line.
| Standard (vertical) | Φ48.3 × 3.2 mm, Q355B high-strength steel, rosette every 0.5 m |
| Ledger (horizontal) | Φ48.3 × 2.5–3.2 mm, forged ends with wedge head pin |
| Diagonal brace | Φ48.3 × 2.5 mm, forged both ends |
| Base jack / U-head | Adjustable 0–600 mm, solid or hollow stem |
| Rosette node | 8-direction self-locking wedge connection, no loose fittings |
| Surface finish | Hot-dip galvanized inside & out, ≥ 55 μm per EN ISO 1461 |
| Standards compliance | EN 12810 / EN 12811, ISO 9001 |
| Working load | Up to 57 kN per standard, configuration-dependent |
| Bay sizes | 0.5 m increments — 0.65 / 1.09 / 1.57 / 2.07 / 2.57 m |
| Standard lengths | 0.5 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0 m |
Most buyers compare suppliers on tonnes. We also quote covered area per tonne, because the same tonnage delivers different square metres depending on the bay size you run. Tell us your bay dimensions and we will quote both.
| 20ft GP container | approx. 22–25 tonnes of ringlock components |
| 40ft GP container | approx. 44–50 tonnes of ringlock components |
| 40ft HC container | approx. 25–28 tonnes, higher cube for bundled planks |
| Typical loading | mixed loading welcome — standards, ledgers, braces, planks and jacks balanced to your BOQ |
| Per square metre | ask for the m²-per-tonne figure for your bay size — we quote both tonnage and covered area so you can compare suppliers on the same basis |
| MOQ | One 20ft container. Mixed loading is welcome, so you can outfit a full project from a single supplier. |
| Lead time | Standard items held in stock dispatch within 48 hours. Production of made-to-order configurations runs 15–25 days after deposit. |
| Incoterms | FOB Tianjin/Shanghai, CIF to your port, or DAP/DDP to your yard — we handle export customs and documentation. |
| Payment terms | T/T with 30% deposit and balance against B/L copy, or confirmed L/C at sight for established buyers. |
| Packing | Steel pallets with strapping and edge protection; export-standard seaworthy packing for all orders. |
| Warranty | Manufacturing defects replaced free of charge. Tell us the batch code and we trace it through the laser code on the component. |
We are a supplier, not a manufacturer. PJSCAFFOLD buys ringlock components directly from our long-term partner factory in Tianchang, Anhui, and we take full responsibility for the consignment as the single point of contact. This means you get factory pricing without a trading margin in between — and if a claim arises, there is one company accountable to you rather than a chain you have to chase.
One 20ft container, approximately 22–25 tonnes of ringlock components. Mixed loading is welcome: most rental companies combine standards, ledgers, planks and jacks in a single container, and we balance the load against your bill of quantities.
Pricing depends on components, bay size, steel grade and finish. Factory-direct purchase typically lands 10–25% below what a trading company would charge, because there is no intermediate margin. Send us your BOQ or required m² and we return a full price list within 24 hours.
Yes. Every order includes free scheme design and quantity take-off. On-site erection training for your crew is available on project orders, together with load tables in the format your scaffolding engineer needs for method statements.
The complete system: standards, ledgers, diagonal braces, base and U-head jacks, stair towers, steel planks, guardrails, brackets and toe boards. We pack per container plan so the set arrives ready to erect rather than as loose parts to be sourced separately.
Our ringlock system is manufactured to EN 12810 / EN 12811 with ISO 9001 quality management, and galvanizing follows EN ISO 1461 at ≥ 55 μm. Mill certificates, factory test reports and dimensional inspection records ship with every consignment, and the report numbers are provided so they can be independently verified.
Yes, and we recommend it. Most buyers combine ringlock standards, ledgers, braces, planks and jacks in one container to balance the fleet against their BOQ. We prepare the loading plan and the weight distribution so no container exceeds its limits.
Standard items held in stock dispatch within 48 hours. Made-to-order configurations run 15–25 days of production after the deposit is received, plus transit — typically 18–28 days to Jebel Ali, 22–32 days to Jeddah or 25–35 days to Dammam depending on routing.
Yes. We can apply your company name, project codes or fleet asset numbering to components — laser marking on standards is common for rental fleet management, and custom colors and branding are available on frames.
Standard terms are T/T with 30% deposit and the balance against a copy of the bill of lading. Confirmed L/C at sight is accepted for established buyers and larger EPC orders. We quote FOB, CIF, DAP and DDP so landed cost is clear before you commit.
Free scheme design · Quantity take-off · Price list within 24 hours
Get a Quote →WhatsApp / Tel: +86 18955015380
Email: leo@pjscaffold.com
The figures above come from our own production specification. These guides document how they are derived and how to check them against a supplier quotation.
Standard lengths, ledger modulus, rosette spacing and bay grids in full.
Read article →Tonnes per container and how mixed loading is balanced against your BOQ.
Read article →What the European standards mean for material approval on site.
Read article →Send your drawings or bill of quantities — free scheme design, quantity take-off and a quote within 24 hours.