Kwikstage is the wedge-lock modular system built for speed: every standard carries V-pressings at nominal 500 mm centres, so ledgers, transoms and braces seat with a positive wedge — no bolts, no loose clips, and a lift height adjustable in 500 mm steps. It is the default access system on sites across Australia, the United Kingdom, South Africa and the Gulf, and PJSCAFFOLD supplies the complete kit with hot-dip galvanizing inside and out.
Components are specified to match the standard your market names — AS/NZS 1576, BS 1139 Part 5, EN 12810 or SANS 10085 — and the documentation follows the order: mill certificates per lot, third-party test reports and destination-scheme certificates commissioned when the volume carries the cost. We put that threshold in writing before you commit, never a logo you cannot verify.
Technical Specifications
| System | Kwikstage wedge-lock modular; V-pressings at nominal 500 mm centres, four-way node |
| Standards (verticals) | 48.3 × 4.0 mm (3.2 mm option), Q235 / Q355; 0.5–3.0 m with head spigot; ≈ 3.0–17.5 kg |
| Ledgers | 48.3 × 3.2 mm, captive wedge ends, upper V-pressings; 0.5–3.0 m; ≈ 2.8–12.5 kg |
| Transoms | 50 × 50 × 5 mm inverted T-section with decking flanges; 0.5–2.4 m; ≈ 4.5–21 kg |
| Diagonal braces | 48.3 × 2.5 mm, pivoted wedge ends, outer V-pressings |
| Stages & brackets | Steel stages 230 mm wide × 63 mm, hook ends, 0.76–2.4 m; hop-up brackets 1/2/3 board (230/460/690 mm) with tie bars |
| Surface | Hot-dip galvanized to EN ISO 1461 (mean ≥ 70 μm, local ≥ 55 μm); painted or powder-coated on request |
| Accessories | Toe board brackets, return transoms, ladder-access transom, loading-bay transom, adjustable base jacks |
Key Features
- Wedge seating locks positive — erection is faster than cuplock and there are no loose fittings to lose
- Lift heights step in 500 mm increments, so irregular facades and slab projections are squared off without cutting standards
- T-section transoms give steel stages a flat, continuous seat with no overlapping plank ends
- Hop-up brackets cantilever the platform 230–690 mm beyond the standards to cover slab edges
- Hot-dip galvanized inside and out for coastal, industrial and mining atmospheres; batch codes trace every component
Ideal Applications
Facade access and brickwork on UK, South African and Gulf sites; residential and commercial construction in Australia and New Zealand; perimeter access on irregular geometry; light shoring and loading bays.
Frequently Asked Questions
What is Kwikstage scaffolding?
A wedge-lock modular system: standards carry welded V-pressings at nominal 500 mm centres, and ledgers, transoms and braces connect with a captive wedge into those pressings. Four members seat at each node with no bolts or separate couplers, which is why it erects faster than tube-and-fitting and is the common access scaffold in Australia, the UK and South Africa.
What sizes do Kwikstage components come in?
Standards run 0.5–3.0 m (a 2.0 m standard at 4.0 mm wall weighs about 11.7 kg); ledgers 0.5–3.0 m with wedge ends; transoms in inverted T-section from 0.5 to 2.4 m; steel stages 0.76–2.4 m at 230 mm width. Custom lengths are available with a short production lead time.
Which standard is Kwikstage made to?
The geometry is common across the industry, but the governing standard differs by market: AS/NZS 1576 in Australia and New Zealand, BS 1139 Part 5 and EN 12810 in the UK and Europe, SANS 10085 in South Africa. Tell us the destination and the standard named in your tender — we specify to it and confirm in writing which documents we can evidence for that order, rather than asserting a mark we cannot show.
Kwikstage or ringlock — which should I stock?
Ringlock carries higher allowable loads and suits shoring and heavy industrial work; kwikstage wins on erection speed, simpler inventory and the T-transom decking seat, and it is what buyers in AU/UK/SA markets ask for by name. Most dealers run both and route by project type — send us your market and we will suggest the mix.
Do you supply it galvanized or painted?
Both. Hot-dip galvanized to EN ISO 1461 is the export standard and the lower lifetime cost outdoors; painted or powder-coated finish is available for markets that prefer it and lowers the upfront price. Whichever finish you choose, ask for the coating specification in writing — the same rule as every other line in the quote.
Request a Quotation
Free scheme design · Quantity take-off · Quote within 24 hours
Get a Quote →WhatsApp / Tel: +86 18955015380
Email: leo@pjscaffold.com
Explore Other Systems
Ringlock Scaffolding
Hot-dip galvanized ringlock scaffolding in Q355B steel to EN 12810/12811. Factory-direct prices, 48h dispatch …
View details →